panasonic corporation automation controls business unit industrial.panasonic.com/ac/e/ cv (acv) asctb230e 201203-t1 ordering information types note: please use ?cv ?? 212 to order built-in resistor type. (asterisks ? ? should be ?led in from ordering information.) standard packing; carton: 50 pcs.; case: 200 pcs. rating 1. coil data note: * other pick-up voltage types are also available. please contact us for details. aut omotive low profile micro-iso relay cv relays (acv) contact arrangement coil voltage protective construction mounting classi?ation part no. 1 form a 12 v dc sealed type micro iso plug-in type acv31012 1 form c micro iso plug-in type acv11012 nominal coil voltage pick-up voltage* (at 20 c 68 f ) drop-out voltage (at 20 c 68 f ) nominal operating current [ 10%] (at 20 c 68 f ) coil resistance [ 10%] (at 20 c 68 f ) nominal operating power (at 20 c 68 f ) usable voltage range (at 85 c 185 f ) 12v dc max. 7.0 v dc (initial) min. 0.6 v dc (initial) 67 ma, 84 ma (with resistor) 180 ? , 142.3 ? (with resistor) 0.8 w, 1.0 w (with resistor) 10 to 16v dc micro iso 1 form c type micro iso 1 form a type rohs compliant features ?low pro?e: 22.5 mm(l) 15 mm(w) 15.7 mm(h) .886 inch(l) .591 inch(w) .618 inch(h) ?low temperature rise te r minal temperature has been reduced compared with using our conventional product ?low sound pressure level noise level has been reduced approx.10db compared with using our conventional product. ?wide line-up micro iso terminal types and resistor inside type. ?plastic sealed type plastically sealed for automatic cleaning. ?compact and high-capacity 20a load switching n.o.: 20a 14v dc, n.c.: 10a 14v dc (max. carrying current: at 85 c 1 85 f ) typical applications ?headlights ?magnetic clutches ?radiator fans ?blowers ?fog lamps ?tail lights ?heaters ?defoggers ?horns ?condenser fans, etc. contact arrangement 1: 1 form c 3: 1 form a acv protective element 0: none (standard type) 2: with resistor inside mounting classification 1: micro iso plug-in type coil voltage, dc 12: 12 v
panasonic corporation automation controls business unit industrial.panasonic.com/ac/e/ cv (acv) asctb230e 201203-t1 2. speci?ations notes: *1. this value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2. the upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. please refer to ?sage ambient condition in cautions for use of automotive relays. *3. please inquire if you will be using the relay in a high temperature atmosphere. * regarding solder, this product is not mil (military standard) compliant. please evaluate solder mounting by the actual equipment before using. reference data characteristics item speci?ations contact arrangement 1 form a 1 form c contact resistance (initial) typ 3m ? (by voltage drop 6v dc 1a) contact voltage drop (after electrical life test) n.o.: max. 0.2 v (by voltage drop 14 v dc 20 a) n.o.: max. 0.2 v (by voltage drop 14 v dc 20 a) n.c.: max. 0.5 v (by voltage drop 14 v dc 10 a) contact material ag alloy (cadmium free) rating nominal switching capacity (resistive load) n.o.: 20 a 14v dc n.o.: 20 a 14v dc, n.c.: 10 a 14v dc max. carrying current (at 85 c 185 f , continuous) n.o.: 20 a 14v dc n.o.: 20 a 14v dc n.c.: 10 a 14v dc nominal operating power 0.8 w, 1.0 w (built-in resistor type) min. switching capacity (resistive load)* 1 1 a 12v dc electrical characteristics insulation resistance (initial) min. 20 m ? (at 500v dc) breakdown voltage (initial) between open contacts 500 vrms for 1 min. (detection current: 10ma) between contacts and coil 500 vrms for 1 min. (detection current: 10ma) operate time (at nominal voltage) (at 20 c 68 f ) max. 10ms (excluding contact bounce time) (initial) release time (at nominal voltage) (at 20 c 68 f ) max. 10ms (excluding contact bounce time) (initial) mechanical characteristics shock resistance functional min. 100 m/s 2 {10g} (half-wave pulse of sine wave: 11ms; detection time: 10 s) destructive min. 1,000 m/s 2 {100g} (half-wave pulse of sine wave: 6ms) vibration resistance functional 10 hz to 100 hz, min. 44.1 m/s 2 {4.5g} (detection time: 10 s) destructive 10 hz to 500 hz, min. 44.1 m/s 2 {4.5g}, time of vibration for each direction; x, y, z direction: 4 hours expected life mechanical min. 10 6 (at 120 cpm) electrical (at nominal switching capacity) min. 10 5 (operating frequency: 2s on, 2s off) conditions conditions for operation, transport and storage* 2 ambient temperature: ?0 c to +85 c ?0 f to +185 f * 3 , humidity: 5% r.h. to 85% r.h. (not freezing and condensing at low temperature), air pressure: 86 to 106kpa mass approx. 15 g .53 oz 1. coil temperature rise (20a) point measured: inside the coil contact carrying current: 20a coil applied voltage: 13.5v 2. distribution of pick-up and drop-out voltage sample: acv11012, 100pcs 3. distribution of operate and release time sample: acv11012, 100pcs. 0 30 60 90 120 150 180 55 857565 temperature rise, c ambient temperature, c 20a 0 30 20 10 40 50 60 70 voltage, v quantity, n 1.5 01 2.0 2.5 3.0 3.5 4.5 5.04.0 5.5 6.0 6.5 7.0 7.5 pick-up voltage drop-out voltage 0 30 20 10 40 50 60 70 80 90 100 3.02.01.51.00.50 2.5 3.5 4.5 5.0 5.5 6.04.0 operate time operate and release time, ms quantity, n release time 4. ambient temperature and operating voltage range 0 5 10 15 30 25 20 ?0 ?0 20 40 60 80 85 1000 120 operation range pick-up voltage (cold start) coil applied voltage, vdc ambient temperature, c
panasonic corporation automation controls business unit industrial.panasonic.com/ac/e/ cv (acv) asctb230e 201203-t1 5-(1). electrical life test (resistive load) sample: acv11012, 3pcs. load: resistive load (nc switching) 10a switching frequency: on 1s, off 1s ambient temperature: room temperature circuit change of pick-up and drop-out voltage change of contact resistance 13.5vdc max. max. min. min. x x 0 2 1 4 6 7 5 3 10 05 no. of operations, 10 4 pick-up and drop-out voltage, v pick-up voltage drop-out voltage 0 max. min. x 10 5 20 30 25 15 10 05 no. of operations, 10 4 contact resistance, m ? load current waveform 200ms 5a 200ms 10v up: coil voltage waveform down: load current waveform 5-(2). electrical life test (lamp load) sample: acv31212, 3pcs. load: 55wx4, inrush: 90a/steady: 20a, lamp actual load switching frequency: on 1s, off 14s ambient temperature: room temperature circuit 13.5vdc 55w 55w 55w 55w change of pick-up and drop-out voltage change of contact resistance max. max. min. min. x x 0 2 1 4 6 7 5 3 20 010 no. of operations, 10 4 pick-up and drop-out voltage, v pick-up voltage drop-out voltage max. min. x 0 10 5 20 30 25 15 20 010 no. of operations, 10 4 contact resistance, m ? load current waveform inrush current: 90a, steady current: 20a 200ms 20a 200ms 10v up: coil voltage waveform down: load current waveform
panasonic corporation automation controls business unit industrial.panasonic.com/ac/e/ cv (acv) asctb230e 201203-t1 dimensions (mm inch ) for cautions f or us e , see rel a y t e c hnical in f ormation. 5-(3). electrical life test (motor load) sample: acv31212, 3pcs. load: inrush: 80a/steady: 18a, radiator fan actual load (motor free) switching frequency: on 2s, off 6s ambient temperature: room temperature circuit change of pick-up and drop-out voltage change of contact resistance 13.5vdc mm max. max. min. min. x x 0 2 1 4 6 7 5 3 30 015 no. of operations, 10 4 pick-up and drop-out voltage, v pick-up voltage drop-out voltage max. min. x 0 10 5 20 30 25 15 30 015 no. of operations, 10 4 contact resistance, m ? load current waveform inrush current: 80a, steady current: 18a 500ms 20a 500ms 10v up: coil voltage waveform down: load current waveform the cad data of the products with a cad data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ 1. micro iso plug-in type external dimensions *a 6.3 68 3.25 4.8 sealed by epoxy resin 0.8 0.8 22.5 9 15 15.7 11 .248 .031 .591 .618 .433 .189 .031 .886 .236 .315 .128 .354 dimension: t oler ance max. 1mm .039 inch : 0.1 .004 1 to 3mm .039 to .118 inch : 0.2 .008 min. 3mm .118 inch : 0.3 .012 note: intervals between terminals is measured at a surface level. schematic (bottom view) 1 form a 1 form c 5 1 2 3 including resistor type also available 4 5 1 2 3 including resistor type also available cad data
|
